Tuesday Tips and Tricks - Getting Organized - Bathrooms

I mentioned at the beginning of the month that I have some maintenance to do in my bathrooms. This week I am going to take care of one of those... the grout.

No, I have not grouted anything before in my life, but there's a first time for everything and I am not afraid to try something new.

My bathtub and my shower have spots where the grout is missing. There are also areas where the hubs used silicone to seal these spots and now there is mildew under the silicone. (yuck) At some point we are going to completely redo the bathrooms, but this will help the aesthetics until then.

If your grout is in good condition, then all you need is a little bleach mixed with water and a scrub brush to brighten it up.

Now, if you need to do some repair work, here's the best set of instructions I found...
You will need:

 Grout

 Grout sealer

 Grout saw

 Bucket

 Wooden dowel for mixing

 Putty knife

 Paintbrush

 Dustpan brush

 Masking tape

 Sponge

 Water

 Cloths

Step 1 - Inspection

Fully examine the entire shower unit to find every instance of cracked grout that needs to be repaired. Stick a small piece of masking tape next to each so that you do not lose track of it. Examining all the points of damaged grout will also enable you to determine the method of repair that is required. Grout that has remained firm despite being cracked will need to be treated differently to that which yields to pressure or flakes away.

Step 2 - Gather Tools and Equipment

Be aware that grout is available in different colors and, if possible, you should take a loose piece of the cracked grout with you to the hardware store so that you get the correct shade. Do not worry if you cannot get the exact match as slight shade amendments can be made by adding more water or grout mix to lighten or darken it respectively.

Step 3 - Remove Grout

Using a grout saw, remove the cracked grout by carefully running the saw across it so that you do damage the surrounding tile or any undamaged grout. Only follow this procedure for sections of grout where the damage is extensive. Hairline cracks that do not appear to have affected the integrity of the grout can be rectified with grout sealer. Once this process is complete, use a brush to clear away the resulting dust so that you are working with a clean surface that will allow the new grout to take.

Step 4 - Mix Grout

Mix the grout in a clean bucket in accordance with the instructions, making slight adjustments with small additions of water or additional grout to obtain the correct shade.

Step 5 - Apply Grout

Apply the newly mixed compound to the holes created by removal of the old cracked grout. Gather some grout onto a putty knife and smooth it into the hole as cleanly as possible until the hole is filled. As you go along, even out the surface of the new grout with a water dampened finger or a putty knife with a rounded tip. Use a damp sponge to gently wipe away any excess from around the repair site and the surrounding tiles, taking care not to dislodge the tiles or remove the grout you have just applied. Allow the grout to dry completely in accordance with the manufacturer’s advice and return to it to use a cloth to buff away any traces of grout remaining on the tiles.

Step 6 - Seal

To protect your work and to reinforce the sections of minor damage, such as hairline cracks, apply some grout sealer after the grout has dried. Leave this to dry thoroughly in accordance with the instructions before using the shower again.

Happy Grouting!!!!


Much love and big hugs!
K